LüneHanse Werkzeugmaschinen

Ihr Ansprechpartner in für Werkzeugmaschinen

E-MAIL info@luenehanse.com
Phone +49 4131 21 97 689
Whatsapp +49 4131 21 97 689
Purchase
CNC Lathe

DMT KERN CD650

CD650
CNC
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
Previous
Next
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
DMT KERN CD650
Previous Prev
Next Next
CNC Lathe

DMT KERN CD650

CD650
CNC
Order now

Details

  • Number2086-743
  • ManufacturerDMT KERN
  • TypeCD650
  • ControlCNC
  • Year2006
  • Delivery timeimmediately
  • Freight basisex Site
  • LocationHamburg
  • OriginGermany

Technical details

  • turning diameter650 mm
  • turning length1.500 mm
  • controlSIEMENS SINUMERIK 840D SL
  • total power requirement33 kW
  • centre distance1.500 mm
  • greates pass round over bed650 mm
  • Swing diameter over gap670 mm
  • Swing diameter over compound slide260 mm
  • face slide travel380 mm
  • Cross slide travel with W-Revolver445 mm
  • Turning lenght in front of the faceplate, Ø 250 mm1.500 mm
  • MAIN DRIVE
  • Drive power AC-motor 40 /60 /100 % duty cycle (ED)33 / 27 / 22 kW
  • transmission ratio2
  • SPINDLE HEADSTOCK
  • Spindlehead DIN55026A8
  • spindle bore diameter106 mm
  • spindle diameter in front bearing140 mm
  • Range of spindle speed (V-constant)1 - 2.000 U/min
  • Chuck sizes250 - 400 mm
  • CROSS SLIDE
  • Feed range cross0,001 - 1.000 mm/U
  • Feed range cross, optional up to5.000 mm/U
  • Feed range longitudinal and thread pitch0,001 - 2.000 mm/U
  • Feed range longitudinal & thread pitch, opt. up to13.000 mm/U
  • Power feed cross9.000 N
  • power feed longitudinal12.000 N
  • rapid traverse cross5 m/min
  • rapid traverse longitudinal10 m/min
  • Turning tool cross section (heigt x width)32 x 32 mm
  • TAILSTOCK
  • diameter of quill100 mm
  • quill travel200 mm
  • Quill - internal taper5 MK
  • AUTOMATIC TOOL TURRET
  • Number of stations12
  • with live tooling for 6 stations
  • Tool holding system (DIN69880) VDI40
  • mounted on the rear of the cross slide
  • with addidional front-mounted MULTIFIX C tool post
  • servo motor for the tool drive (variable speed)
  • ELECTRICAL CONNECTION DATA
  • total power requirement38 kW
  • Three-phase current400 / 50 V / Hz

Equipment

  • Combined operator pane, C-axis with drilling, milling and engraving cycles, Residual material detection and processing..., .. during parting-off and contour pocket machining, Autom. tool disk turret, 12 stations, 6 driven, MULTIFIX C, front-mounted, Hardened planing slide guide on the bed slide, Coolant pump man. steplessly adjustable ..., ... and programmable via M-functions, Three jaw chuck SMW AUTOBLOK, Oil- and emulsion mist filter for worksp. extract., radial driven tool holders, pieces, axial driven tool holders, pieces, longitudial tool holder, pieces, tool holders internal / drill bits, pieces, Hinged belt chip coveyor, Fixed steady rest with roller jaws

Description

The operating hours counter was read on 09/18/2025: 4746h

Machine bed as a flat bed with heavy wear on the “counter surfaces” for the wedge strips (under flat bed guide)
If the wedge strips of the Z-axis are readjusted until they are in contact with normal preload, the machine jams (from approx. Z+800). If the wedge strip is sufficiently loosened (for the entire travel range of the Z-axis), the machine stops during thread cutting with a positioning error. Short diameters can be achieved in the chuck area with several cutting edges in the control system. Continuous diameters are turned conically by approx. 0.2 mm / 100 mm.